Chapter 4. WDS Mode Configuration
Please refer to illustrations of the section 1.3 for possible applications in the WDS mode. This section provides
detailed explanation for users to configure in the WDS mode with help of illustrations. In the WDS mode,
functions listed in the table below are also available from the Web-based GUI interface.
Option
Operating Mode
Functions
Time Server
4.1 External Network Connection
4.1.1 Network Requirement
You could expand your Ethernet network via WDS link. In this mode, the TEW-455APBO connects directly to a
wired LAN, and wirelessly bridges to a remote access point via a WDS link as shown in Figure 4-1. In the mode,
it can't associate with any wireless clients.
System
General Settings
LAN
Advanced Settings
SNMP
UPnP
Table 4-1: WDS Mode Functions
Figure 4-1 Point to Point Configuration
TEW-455APBO High Power Wireless Outdoor PoE Access Point
Wireless
WDS Setup
Firmware Upgrade
56
Administrator
Management
Profiles Settings
Network Utility
Reboot
User Manual
Status
System Overview
WDS Status
Extra Info
Event Log