Configure For Wds Mode - TRENDnet TEW-455APBO Quick Installation Manual

4. Configure for WDS Mode

Note:
1. WDS Mode requires at least 2 TEW-455APBO
2. Please install and test in a lab environment before mounting the TEW-455APBO.
3. After you set the TEW-455APBO to WDS mode, wireless clients will not be able to
connect to the TEW-455APBO.
Setting Up the Main TEW-455APBO
1. Copy down the 12 digit Mac ID (Address) of
the Remote TEW-455APBOs. The Mac ID is
on the side of the TEW-455APBO
2. Follows steps 1-4 and 11-13 in section 3
Configure the Access Point.
3. Click System -> Operation Mode.
108Mbps 14dBi High Power Wireless
Outdoor PoE Access Point
(TEW-455APBO)
Internet
Cable/DSL
Modem
PoE Power Adapter
Cable/DSL Advanced
VPN Firewall Router
(TW100-BRV304)
Workstations with
PCI Adapter
Ethernet PoE
10
19dBi Outdoor High Gain
Directional Antenna
(TEW-AO19D)
Cable
(TEW-ASAL1)
PoE Power Adapter
10/100Mbps
Multi-Port Print Server
(TE100-P21)
16-Port 10/100Mbps
GREENnet Switch
(TE100-S16Eg)
Notebook with Workstations with
PC Card PCI Adapter
Printers