TRENDnet User's Guide
System Reboot
Management
>
Backup/Restore Settings
To reboot the AP, do the following:
1
Log into your access point management page (refer to
on page
10).
2
Click Management > Backup/Restore Settings.
3
Click Reboot.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Log in to Management Page"
SmartConsole
Use SmartConsole to view and edit the main parameters of the devices, such as product
name, IP address, MAC address, firmware version, etc.
Install the SmartConsole
To install the SmartConsole in your computer, do the following:
1
Download and install Adobe AIR software to your computer.
2
From the supplied CD, copy the SmartConsole program to the local disk of your
computer.
3
Run "AP Utility.exe" in SmartConsole folder.
The program main screen opens. Please refer to the next section.
TEW-821DAP
49