HP 6125G Command Reference Manual page 154

Field
Type
BGP version
remote router ID
BGP current state
BGP current event
BGP last state
Port
Configured: Active Hold Time
Keepalive Time
Received: Active Hold Time
Negotiated: Active Hold Time
Peer optional capabilities
Address family IPv4 Unicast
Received
Sent
Maximum allowed prefix number
Threshold
Minimum time between advertisement runs
Optional capabilities
Route refresh capability has been enabled
ORF advertise capability based on prefix (type 64):
Local: both
Negotiated: send
Peer Preferred Value
BFD
Routing policy configured
# Display the log information of the peer 10.1 10.25.20.
<sysname> display bgp peer 10.110.25.20 log-info
Description
Peer type.
BGP version.
Router ID of the peer.
Current state of the peer.
Current event of the peer.
Previous state of the peer.
TCP port numbers of the local router and its peer.
Local holdtime interval.
Local keepalive interval.
Remote holdtime interval.
Negotiated holdtime interval.
Optional capabilities supported by the peer, including
BGP multiprotocol extensions and route refresh.
Routes are advertised and received in IPv4 unicasts.
Total numbers of received packets and updates.
Total numbers of sent packets and updates.
Maximum allowed prefix number.
Percentage of received prefixes from the peer group to
maximum prefixes allowed to receive from the peer
group; If the percentage is reached, the system
generates alarm messages.
Minimum route advertisement interval.
Optional capabilities enabled by the peer.
The route-refresh capability has been enabled.
The BGP peer supports the ORF capability based on IP
prefix. The capability value is 64.
The local BGP router supports both the ORF sending
and receiving capabilities.
Negotiation result: The local BGP router can send
Router-refresh messages carrying the ORF
information, and the peer can receive Router-refresh
messages carrying the ORF information. (This field is
not displayed if neither the send nor the receive
capability is supported.)
Preferred value specified for the routes from the peer.
BFD state: enabled or disabled.
Local routing policy.
143