Filter-Policy Export (Ospf View) - HP 6125G Command Reference Manual

<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] filter ip-prefix my-prefix-list import
[Sysname-ospf-100-area-0.0.0.1] filter 2000 export

filter-policy export (OSPF view)

Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol [ process-id ] ]
undo filter-policy export [ protocol [ process-id ] ]
View
OSPF view
Default level
2: System level
Parameters
acl-number: Number of an ACL used to filter redistributed routes, in the range of 2000 to 3999.
ip-prefix-name: Name of an IP prefix list used to filter redistributed routes, a string of up to 19 characters.
protocol: Specifies a protocol from which to filter redistributed routes. The protocol can be direct, static,
rip, ospf or bgp. If no protocol is specified, all redistributed routes are filtered.
process-id: Process ID, which is required when the protocol is rip or ospf, in the range of 1 to 65535.
Description
Use filter-policy export to configure the filtering of redistributed routes.
Use undo filter-policy export to disable the filtering.
By default, the filtering of redistributed routes is not configured.
You can use this command to filter redistributed routes as needed.
If you want to reference an advanced ACL (with a number from 3000 to 3999) in the command, the ACL
should be configured with the rule [ rule-id ] { deny | permit } ip source sour-addr sour-wildcard
command to deny/permit a route with the specified destination, or with the rule [ rule-id ] { deny |
permit } ip source sour-addr sour-wildcard destination dest-addr dest-wildcard command to deny/permit
a route with the specified destination and mask. The source keyword specifies the destination address of
a route and the destination keyword specifies the subnet mask of the route (the subnet mask must be valid;
otherwise, the configuration is ineffective).
Related commands: import-route.
Examples
# Filter redistributed routes using ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule deny source 192.168.10.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] ospf 100
[Sysname-ospf-100] filter-policy 2000 export
92