Filter-Policy Export (Bgp/Bgp-Vpn Instance View) - HP 6125G Command Reference Manual

Description
Use ebgp-interface-sensitive to enable the clearing of EBGP session on any interface that becomes
down.
Use undo ebgp-interface-sensitive to disable the function.
This function is enabled by default.
Examples
# In BGP view, enable the clearing of EBGP session on any interface that becomes down.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ebgp-interface-sensitive
# In BGP-VPN instance view, enable the clearing of EBGP session on any interface that becomes down.
(The VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] ebgp-interface-sensitive

filter-policy export (BGP/BGP-VPN instance view)

Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ direct | ospf process-id | rip process-id |
static ]
undo filter-policy export [ direct | ospf process-id | rip process-id | static ]
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
acl-number: Number of an ACL used to filter outgoing routing information, ranging from 2000 to 3999.
ip-prefix-name: Name of an IP prefix list used to filter outgoing routing information, a string of 1 to 19
characters.
direct: Filters direct routes.
ospf process-id: Filters outgoing routes redistributed from the OSPF process with an ID from 1 to 65535.
rip process-id: Filters outgoing routes redistributed from a RIP process. The ID is in the range of 1 to
65535.
static: Filters static routes.
Description
Use filter-policy export to configure the filtering of outgoing routes.
Use undo filter-policy export to remove the filtering.
159