HP 6125G Command Reference Manual page 80

SPF Scheduled Count: 5
ExChange/Loading Neighbors: 0
Interface: 192.168.1.2 (Vlan-interface11)
Cost: 1 State: DR
Priority: 1
Designated Router: 192.168.1.2
Backup Designated Router: 192.168.1.1
Timers: Hello 10 , Dead 40 , Poll
Table 14 Command output
Field
OSPF Process 1 with Router ID 192.168.1.2
RouterID
Router Type
Route Tag
Multi-VPN-Instance is not enabled
SPF-schedule-interval
LSA generation interval
LSA arrival interval
Transmit pacing
Default ASE Parameter
Route Preference
ASE Route Preference
SPF Computation count
RFC1583 Compatible
Area Count
Nssa Area Count
7/5 translator state
Type: Broadcast
40 , Retransmit 5 , Transmit Delay 1
Description
OSPF process ID and OSPF router ID.
Router ID.
Router type:
•
ABR
•
ASBR
•
NSSA
•
Null
The tag of redistributed routes.
The OSPF process does not support multi-VPN-instance.
Interval for SPF calculations.
LSA generation interval.
LSA arrival interval.
LSU packet transmit rate of the interface:
•
Interval—Indicates the LSU transmit interval of the interface.
•
Count—Indicates the maximum number of LSU packets sent
at each interval.
Default ASE Parameters: metric, tag, route type.
Internal route priority.
External route priority.
SPF computation count of the OSPF process.
Compatible with routing rules defined in RFC 1583.
Area number of the current process.
NSSA area number of the current process.
State of the translator that translates Type-7 LSAs to Type-5
LSAs. The value can be one of the following:
•
Enabled—Indicates the translator is specified through
commands.
•
Elected—Indicates the translator is designated through
election.
•
Disabled—Indicates the device is not a translator that
translates Type-7 LSAs to Type-5 LSAs.
69
MTU: 1500