Vlink-Peer (Ospf Area View) - HP 6125G Command Reference Manual

count: Maximum number of LSU packets sent by an interface at each interval. It is in the range of 1 to
200. If the router has a number of OSPF interfaces, HP recommends decreasing this interval to reduce
the total numbers of LSU packets sent by the router every second.
Description
Use transmit-pacing to configure the maximum number of LSU packets that can be sent every the
specified interval.
Use undo transmit-pacing to restore the default.
By default, an OSPF interface sends up to three LSU packets every 20 milliseconds.
Examples
# Configure all the interfaces under OSPF process 1 to send up to 10 LSU packets every 30 milliseconds.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] transmit-pacing interval 30 count 10

vlink-peer (OSPF area view)

Syntax
vlink-peer router-id [ hello seconds | retransmit seconds | trans-delay seconds | dead seconds | simple
[ cipher | plain ] password | { md5 | hmac-md5 } key-id [ cipher | plain ] password ] *
undo vlink-peer router-id [ hello | retransmit | trans-delay | dead | [ simple | { md5 | hmac-md5 }
key-id ] ] *
View
OSPF area view
Default level
2: System level
Parameters
router-id: Router ID of the neighbor on the virtual link.
hello seconds: Hello interval in seconds, in the range of 1 to 8192. The default is 10. It must be identical
to the hello interval on the virtual link neighbor.
retransmit seconds: Retransmission interval in seconds, in the range of 1 to 3600. The default is 5.
trans-delay seconds: Transmission delay interval in seconds, in the range of 1 to 3600. The default is 1.
dead seconds: Dead interval in seconds, in the range of 1 to 32768. The default is 40. It must be
identical to that on the virtual link neighbor. The dead interval is at least four times the hello interval.
md5: MD5 authentication.
hmac-md5: HMAC-MD5 authentication.
simple: Simple authentication.
key-id: Key ID for MD5 or HMAC-MD5 authentication, in the range of 1 to 255.
ciper: Sets a ciphertext password.
plain: Sets a plaintext password.
124