Balance (Ipv6 Address Family View) - HP 6125G Command Reference Manual

Keywords
suppress-policy
origin-policy
attribute-policy
Description
Use aggregate to create an IPv6 summary route in the IPv6 BGP routing table.
Use undo aggregate to remove an IPv6 summary route.
By default, no summary route is configured.
Examples
# In IPv6 address family view, create a summary of 12::/64 in the IPv6 routing table.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] aggregate 12:: 64

balance (IPv6 address family view)

Syntax
balance number
undo balance
View
IPv6 address family view
Default level
2: System level
Parameters
number: Number of BGP routes participating in load balancing , in the range of 1 to 8. When it is set
to 1, load balancing is disabled.
Description
Use balance to configure the number of routes participating in IPv6 BGP load balancing.
Use undo balance to restore the default.
The feature is not available by default.
Unlike IGP, BGP has no explicit metric for making load balancing decision. Instead, it implements load
balancing by defining its routing rule.
Related commands: display bgp ipv6 routing-table.
Examples
# Set the number of routes participating in IPv6 BGP load balancing to 2.
Function
Used to create a summary route and suppress the advertisement of some
summarized routes. If you want to suppress some routes selectively and
leave other routes still advertised, use the if-match clause of the route-policy
command.
Selects only routes satisfying the routing policy for route summarization.
Sets attributes except the AS_PATH attribute for the summary route. The
same work can be done by using the peer route-policy command.
272