Ripng Poison-Reverse; Ripng Split-Horizon - HP 6125G Command Reference Manual
Layer 3 - ip routing
Hide thumbs
Also See for 6125G:
- Command reference manual (426 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
ripng poison-reverse
Syntax
ripng poison-reverse
undo ripng poison-reverse
View
Interface view
Default level
2: System level
Parameters
None
Description
Use ripng poison-reverse to enable the poison reverse function.
Use undo ripng poison-reverse to disable the poison reverse function.
By default, the poison reverse function is disabled.
Examples
Enable the poison reverse function for RIPng update messages on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng poison-reverse
ripng split-horizon
Syntax
ripng split-horizon
undo ripng split-horizon
View
Interface view
Default level
2: System level
Parameters
None
Description
Use ripng split-horizon to enable the split horizon function.
Use undo ripng split-horizon to disable the split horizon function.
By default, the split horizon function is enabled.
The split horizon function is necessary for preventing routing loops. Do not disable it unless you make
sure that it is necessary.
223
Advertisement
Table of Contents
