Rip Output; Rip Poison-Reverse - HP 6125G Command Reference Manual
Layer 3 - ip routing
Hide thumbs
Also See for 6125G:
- Command reference manual (426 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
rip output
Syntax
rip output
undo rip output
View
Interface view
Default level
2: System level
Parameters
None
Description
Use rip output to enable the interface to send RIP messages.
Use undo rip output to disable the interface from sending RIP messages.
Sending RIP messages is enabled on an interface by default.
Examples
# Disable VLAN-interface 10 from receiving RIP messages.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] undo rip output
rip poison-reverse
Syntax
rip poison-reverse
undo rip poison-reverse
View
Interface view
Default level
2: System level
Parameters
None
Description
Use rip poison-reverse to enable the poison reverse function.
Use undo rip poison-reverse to disable the poison reverse function.
By default, the poison reverse function is disabled.
Examples
# Enable the poison reverse function for RIP routing updates on VLAN-interface 10.
<Sysname> system-view
51
Advertisement
Table of Contents
