Filter-Policy Import (Ospfv3 View) - HP 6125G Command Reference Manual
Layer 3 - ip routing
Hide thumbs
Also See for 6125G:
- Command reference manual (426 pages) ,
- Configuration manual (379 pages) ,
- Release note (60 pages)
Table of Contents
Advertisement
[Sysname-ospfv3-1] filter-policy 2001 export
# Configure ACL6 3000 to permit only route 2001::1/128 to pass, and reference ACL6 3000 to filter
redistributed routes.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] rule 10 permit ipv6 source 2001::1 128 destination
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 128
[Sysname-acl6-adv-3000] rule 100 deny ipv6
[Sysname-acl6-adv-3000] quit
[Sysname] ospfv3
[Sysname-ospfv3-1] filter-policy 3000 export
filter-policy import (OSPFv3 view)
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } import
undo filter-policy import
View
OSPFv3 view
Default level
2: System level
Parameters
acl6-number: Specifies an ACL number, ranging from 2000 to 3999.
ipv6-prefix ipv6-prefix-name: Specifies the name of an IPv6 prefix list, a string of up to 19 characters.
Description
Use filter-policy import to configure OSPFv3 to filter routes computed from received LSAs.
Use undo filter-policy import to remove the configuration.
By default, OSPFv3 does not filter routes computed from received LSAs.
If you want to reference an advanced ACL (with a number from 3000 to 3999) in the command, the ACL
should be configured with the rule [ rule-id ] { deny | permit } ipv6 source sour sour-prefix command to
deny/permit a route with the specified destination, or with the rule [ rule-id ] { deny | permit } ipv6 source
sour sour-prefix destination dest dest-prefix command to deny/permit a route with the specified
destination and prefix. The source keyword specifies the destination address of a route and the
destination keyword specifies the prefix of the route (the prefix must be valid; otherwise, the configuration
is ineffective).
Using the filter-policy import command only filters routes computed by OSPFv3. The routes that fail to
pass are not added to the routing table.
Examples
# Filter received routes using the IPv6 prefix list abc.
<Sysname> system-view
[Sysname] ip ipv6-prefix abc permit 2002:1:: 64
[Sysname] ospfv3 1
[Sysname-ospfv3-1] filter-policy ipv6-prefix abc import
253
Advertisement
Table of Contents
