Import Route-Policy; Ip Binding Vpn-Instance - HP 6125G Command Reference Manual

Only routes that survive the filtering are added into the BGP routing table.
Examples
# Configure BGP to filter received routes using ACL 2255.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] filter-policy 2255 import

import route-policy

Syntax
import route-policy route-policy
undo import route-policy
View
VPN instance view
Default level
2: System level
Parameters
route-policy: Name of the import routing policy for the VPN instance, a string of 1 to 63 characters.
Description
Use import route-policy to apply an import routing policy to a VPN instance.
Use undo import route-policy to remove the application.
By default, all routes permitted by the import target attribute are accepted.
You can specify an import routing policy when the route redistribution control provided by the extended
community attributes is not enough. An import routing policy may deny routes that are permitted by the
import target attributes.
Examples
# Apply import routing policy poly-1 to VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] import route-policy poly-1

ip binding vpn-instance

Syntax
ip binding vpn-instance vpn-instance-name
undo ip binding vpn-instance vpn-instance-name
View
VLAN interface view, tunnel interface view
Default level
2: System level
381