Default; Default-Cost (Ospf Area View) - HP 6125G Command Reference Manual

default

Syntax
default { cost cost | limit limit | tag tag | type type } *
undo default { cost | limit | tag | type } *
View
OSPF view
Default level
2: System level
Parameters
cost: Specifies the default cost for redistributed routes, in the range of 0 to 16777214.
limit: Specifies the default upper limit of routes redistributed per time, in the range of 1 to 2147483647.
tag: Specifies the default tag for redistributed routes, in the range of 0 to 4294967295.
type: Specifies the default type for redistributed routes: 1 or 2.
Description
Use default to configure default parameters for redistributed routes.
Use undo default to restore default values.
The cost, route type, tag, and the upper limit are 1, 2, 1 and 1000 by default.
Related commands: import-route.
Examples
# Configure the default cost, upper limit, tag and type as 10, 20000, 100 and 2 for redistributed
external routes.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] default cost 10 limit 20000 tag 100 type 2

default-cost (OSPF area view)

Syntax
default-cost cost
undo default-cost
View
OSPF area view
Default level
2: System level
Parameters
cost: Specifies a cost for the default route advertised to the Stub or NSSA area, in the range of 0 to
16777214.
62