Display Ip Community-List - HP 6125G Command Reference Manual

Table 78 Command output
Field
ListID
Mode
Expression

display ip community-list

Syntax
display ip community-list [ basic-community-list-number | adv-community-list-number | comm-list-name ]
[ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
basic-community-list-number: Basic community list number, in the range of 1 to 99.
adv-community-list-number: Advanced community list number, in the range of 100 to 199.
comm-list-name: Community list name, a string of 1 to 31 characters, which can contain letters, numbers,
and signs.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip community-list to display BGP community list information.
All BGP community list information will be displayed if no basic-community-list-number or
adv-community-list-number is specified.
Related commands: ip community-list, if-match community, and apply community.
Examples
# Display the information of the BGP community list 1.
<Sysname> display ip community-list 1
Community List Number 1
permit 1:1 1:2 2:2
Description
AS path list ID
Match mode: permit or deny
Regular expression for matching
343