If-Match Tag - HP 6125G Command Reference Manual

Default level
2: System level
Parameters
external-type1: OSPF Type 1 external routes.
external-type1or2: OSPF Type 1 or 2 external routes.
external-type2: OSPF Type 2 external routes.
internal: Internal routes (OSPF intra-area and inter-area routes).
nssa-external-type1: OSPF NSSA Type 1 external routes.
nssa-external-type1or2: OSPF NSSA Type 1 or 2 external routes.
nssa-external-type2: OSPF NSSA Type 2 external routes.
Description
Use if-match route-type to configure a route type match criterion.
Use undo if-match route-type to remove the match criterion.
The match criterion is not configured by default.
Examples
# Configure node 10 in permit mode of routing policy policy1 to match OSPF internal routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match route-type internal

if-match tag

Syntax
if-match tag value
undo if-match tag
View
Routing policy view
Default level
2: System level
Parameters
value: Specifies a tag from 0 to 4294967295.
Description
Use if-match tag to match routing information having the specified tag.
Use undo if-match tag to remove the match criterion.
The match criterion is not configured by default.
Examples
# Configure node 10 in permit mode of routing policy policy1 to permit RIP and OSPF routing
information with a tag of 8.
<Sysname> system-view
349