Display Bgp Group - HP 6125G Command Reference Manual

display bgp group

Syntax
display bgp group [ group-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
group-name: Peer group name, a string of 1 to 47 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp group to display peer group information.
Examples
# Display the information of the peer group aaa.
<Sysname> display bgp group aaa
BGP peer-group is aaa
Remote AS 200
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer
2.2.2.1
Table 29 Command output
Field
BGP peer-group
Remote AS
AS MsgRcvd MsgSent
200 0
OutQ PrefRcv Up/Down
0 0 0 00:00:35 Active
Description
Name of the BGP peer group
AS number of peer group
138
State