HP 6125G Command Reference Manual page 294

Description
Use display bgp ipv6 peer to display peer/peer group information.
If no parameter specified, information about all peers and peer groups is displayed.
Examples
# Display all IPv6 peer information.
<Sysname> display bgp ipv6 peer
BGP local router ID : 192.168.1.40
Local AS number : 100
Total number of peers : 1
Peer
2001::1
Table 69 Command output
Field
BGP local router ID
Local AS number
Total number of peers
Peers in established
state
Peer
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State
# Display the detailed information of IPv6 peer 1::1.
<Sysname> display bgp ipv6 peer 1::1 verbose
BGP Peer is 1::1,
Type: EBGP link
BGP version 4, remote router ID 45.1.1.1
BGP current state: Established, Up for 00h01m34s
BGP current event: KATimerExpired
BGP last state: OpenConfirm
Port:
Configured: Active Hold Time: 180 sec
Received
AS MsgRcvd
100
Description
Local router ID
Local AS number
Total number of BGP peers
Number of established BGP peers
IPv6 address of the peer
AS number
Messages received
Messages sent
Messages to be sent
Number of prefixes received
Lasting time of a session/Lasting time of present state (when no session is
established)
Peer state
remote AS 100,
Local - 1031 Remote - 179
: Active Hold Time: 180 sec
Peers in established state : 0
MsgSent OutQ PrefRcv Up/Down
0 0 0
Keepalive Time: 60 sec
283
State
0 00:02:02 Active