Mmc: 8003 Assign Tenant Group - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 803
3 3
DCS
Allows the assignment of DCS tenant groups on a per-cabinet, slot and port basis. The simple
rule is Cabinet-Slot-Port=Tenant. The simplicity of this program allows for flexible assignments.
The only information needed is the correct correlation of entries.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Open programming and select 803
Display shows
2. Enter cabinet (C) number (if no change, press RIGHT
soft key to move cursor)
3. Enter slot (S) number (if no change, press RIGHT
soft key to move cursor)
4. Enter port (P) number (if no change, press RIGHT
soft key to move cursor)
5. Enter tenant (T) number (if no change, press RIGHT
soft key to return to step 2)
6. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
ASSIGN TENANT GROUP
7 7
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
All assignments tenant 1
Tenant group
MMC 803 [DCS] (Page 1 of 1)
7 7 7 7
816 408i
DISPLAY
TENANT GROUP
C:1 S:1 P:01 T:1
TENANT GROUP
C:1 S:1 P:01 T:1
TENANT GROUP
C:1 S:1 P:01 T:1
TENANT GROUP
C:1 S:1 P:01 T:1
TENANT GROUP
C:1 S:1 P:01 T:1
MMC PROGRAMS
NOVEMBER 2001
7 7 7 7
408