Mmc: 311 Assign Sim Parameter - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 311
   
DCS
Assigns and sets parameters for the serial interface module (SIM). Refer to tables 1–12, below.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 311
Display shows
2. Enter station number connected to SIM (e.g., 257)
from dial keypad
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
3. Enter desired selection from table 1 (00–10, e.g. 01)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
Refer to table 1 for your selected option and go to
the table indicated (e.g. 3) to enter required
value (e.g. 0) using dial keypad or by pressing UP or
DOWN key
Press RIGHT soft key to move cursor
4. Repeat step 3 for all required options (00–10 in table 1)
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
TABLE 1. SIM PARAMETER
00 SIM TYPE =
01 CALL MODE =
02 ANS MODE =
03 AUTO BAUD =
04 DTR CHECK =
05 ECHO =
06 PROTOCOL =
07 SPEED =
08 CHAR LENGTH =
09 PARITY =
10 STOP BIT =
ASSIGN SIM PARAMETER
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Table 2
Table 3
Table 4
Table 5
Table 6
Table 7
Table 8
Table 9
Table 10
Table 11
Table 12
MMC 311 [DCS] (Page 1 of 2)
✗ ✗ ✗ ✗ ✗ ✗ ✗ ✗
816 408i
DISPLAY
[256] SIM PARA
SIM TYPE :DTE
[257] SIM PARA.
SIM TYPE :DTE
[257] SIM PARA.
CALL MODE:AWITH
[257] SIM PARA.
CALL MODE:MANUAL
MMC PROGRAMS
NOVEMBER 2001
✗ ✗ ✗ ✗
408