Mmc: 805 Tx Level And Gain - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 805
3 3
DCS
Allows the system administrator to set the base level of TX volume and the TSW gain control for
nine time-switch connect types.
There are eight (8) volume levels which are controlled by the UP and DOWN keys on the keyset.
However, there are 11 possible levels in a DCS or Compact II system, nine in an 816 system, and
four in a 408/408i system. With this MMC, you can select the desired levels.
You should only change TSW gain control values under the supervision of Technical Sup-
port.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
ACTION
1. Open programming and select 805
Display shows
2. Press UP or DOWN key to select TX LEVEL CON-
TROL or TSW GAIN CONTROL
OR
Press RIGHT soft key to select
If you selected TX, goto step 3
If you selected TSW, goto step 4
3. Press RIGHT soft key to go to the volume level
OR
Press UP or DOWN key to go to next volume level
Enter desired volume level via dial keypad
OR
Use UP or DOWN key to scroll data (00-10)
(Go to step 6 if finished)
4. Press RIGHT soft key to go to the TSW GAIN CON-
TROL type
OR
Press UP or DOWN key to go to next TSW type
TX LEVEL AND GAIN
3 3 3 3
CI CII
Caution
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
MMC 805 (Page 1 of 2)
3 3 408i 3 3
816
DISPLAY
TX LEVEL CONTROL
LEVEL 0
TX LEVEL CONTROL
LEVEL 0
TX LEVEL CONTROL
LEVEL 1
TX LEVEL CONTROL
LEVEL 1
TSW GAIN CONTROL
SLT SLT:+0. 0
MMC PROGRAMS
NOVEMBER 2001
3 3
408
1
1
2
3