Mmc: 312 Allow Clip - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 312
3 3
DCS
Allows the system installer or administrator to:
allow or prevent receipt of CLIP data from the network
§
request or restrict sending of CLIP data to the network.
§
Each station can have the following options:
YES
SND:
NO
YES
RCV:
NO
INFO: If YES selected for SND option, you can select the CLIP display option from
0 CO Tel
1 Extn. Number
2 CO + Extn. No.
3 DID Number.
ACTION
1. Open programming and select 312
Display shows
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station and press right
soft key to move cursor
OR
Press ANS/RLS to select all
3. Dial 0 (NO) or 1 (YES) to select RCV option (e.g. 1)
OR
Press UP or DOWN to select option and press right
soft key to move cursor to SND field
4. Dial 0 (NO) or 1 (YES) to select SND option (e.g. 1)
OR
Press UP or DOWN to select option and press right
soft key
If you selected YES for SND option, display shows
Dial 0–3 to select INFO option
OR
Press UP or DOWN to select
Press RIGHT soft key
ALLOW CLIP
3 3
CI CII
- request the network to send Caller ID when outgoing call is made.
- request the network NOT to send Caller ID when outgoing call is made.
- allow display of CLIP data at keysets.
- prevent display of CLIP data at keysets.
MMC 312 (Page 1 of 2)
3 3 3 3
816 408i
DISPLAY
[201] ALLOW CLIP
RCV:YES SND:YES
[205] ALLOW CLIP
RCV:YES SND:YES
OR
[ALL] ALLOW CLIP
RCV:YES SND:YES
[205] ALLOW CLIP
RCV:YES SND:YES
[205] ALLOW CLIP
RCV:YES SND:YES
[205] ALLOW CLIP
INFO:C.O Tel.
MMC PROGRAMS
NOVEMBER 2001
3 3 7 7
408