Samsung DCS Programming Manual page 141

DCS
COMBINED PROGRAMMING MANUAL
MMC: 428
3 3
DCS
Used to control whether an incoming trunk can dial calls for specific trunks. (In the following ex-
ample, you don't want trunk 705 to dial calls for 708.)
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
ACTION
1. Open programming and select 428
Display shows
2. Dial the incoming trunk number (e.g., 705)
OR
Press UP or DOWN key to select trunk and press
RIGHT soft key
OR
Press ANS/RLS to select all trunks
3. Dial the trunk number (e.g., 708)
OR
Press UP or DOWN key to select trunk and press
RIGHT soft key
4. Dial 1 for YES or 0 for NO
OR
Press UP or DOWN key to select YES/NO and press
RIGHT soft key
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
ASSIGN TRUNK / TRUNK USE
7 7
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
DIAL=YES
None
MMC 428 (Page 1 of 1 )
3 3 3 3 408i
816
DISPLAY
[701] USE [702]
DIAL:YES
[705] USE [702]
DIAL:YES
[705] USE [708]
DIAL:YES
[705] USE [708]
DIAL:NO
MMC PROGRAMS
NOVEMBER 2001
7 7 7 7
408