Mmc: 733 Aa Plan Table - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 733
3 3
DCS
Used to call up the customer-recorded and pre-recorded messages into plans compiled in MMC
732, AA Translation Table. Pre-recorded messages listed below can be applied and destinations
can be programmed as required. Specific ports are programmed in MMC 735, AA Use Table.
There are a total of 64 messages on an AA card:
- 48 messages are to be recorded by the user (01-48),
- 16 messages are pre-recorded in ROM on the card (49-64).
Options are as follows:
Dial Option
00 DAY MSG
01 NIGHT MSG
02 ALTER MSG
03 INVLID MSG
04 NO ANS MSG
05 XFER MSG
06 BUSY MSG
07 NO STN MSG
08 NO ACT MSG
09 CAMP ON
10 ANS DELAY
11 RETRY CNT
12 TRANS TABLE
13 BUSY DEST
14 NO ANS DEST
15 NO ACT DEST
16 INVALID DEST
There is a total of 12 tables (01-12) in the system, but not all tables have to be used.
DESTINATION : STATION, STATION GROUP, AA PLAN NO, REPEAT.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
AA PLAN TABLE
7 7
CI CII
Value
01-64
01-64
01-64
01-64
01-64
01-64
01-64
01-64
01-64
On/Off
01-10
0-5
01-12
Dest.
Dest.
Dest.
Dest.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
MMC 733 (Page 1 of 2)
3 3 3 3
816 408i
Description
Introduction message during Day Mode
Introduction message during Night Mode
Emergency message
Message when an invalid digit is dialled
Message when there is no reply from the
destination
Transfer notifying message
Message on busy reply
Message on retrial
Message on no action
Allow camp-on to busy extension
Answer Delay
No of times the AA will try to connect before routing
to final destination.
Assigning associated TRANS TABLE
Alternative destination on busy
Alternative destination on no answer
Default destination on no action
Default destination on invalid action
MMC PROGRAMS
NOVEMBER 2001
7 7 7 7
408