Mmc: 604 Assign Station To Page Zone - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 604
3 3
DCS
Allows the assignment of a keyset to any of the internal paging zones 1 to 4 and All page (page
plus ). The total number of keysets that can receive a page is limited to 80 (DCS) or 40 (Com-
pact II) or 12 (816) or 4 (408/408i). A keyset may be assigned to more than one zone.
The assignment is controlled by the use of class marks. If a keyset is flagged as "1" in a zone
column, it will receive pages for that zone. If the keyset is flagged as "0," it will not receive pages
for that zone. Keysets can receive pages for more than one zone.
Note: 408/408i systems are assigned internal page zones 1–2 only. Therefore, only these zones can be
flagged as "1". Zones 3 and 4 are flagged as "0."
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 604
Display shows
2. Enter index number (01–80 or 01–40 or 01–12 or 1–4
depending on your system–see above) via keypad
(e.g., 04)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
3. Enter station number (e.g., 205) via dial keypad
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
4. Move cursor under page zone desired (e.g. 2) by press-
ing UP or DOWN key and enter the digit 1 under the
zone
Press RIGHT soft key to return to step 2 to continue with
entries
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
ASSIGN STATION TO
PAGE ZONE
3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear entry
No stations assigned
All zone is set ( )
None
MMC 604 (Page 1 of 1)
3 3 3 3
816 408i
DISPLAY
ENTRY:STN :1 2 3 4
ENTRY:STN :1 2 3 4
ENTRY:STN :1 2 3 4
ENTRY:STN :1 2 3 4
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408
01:NONE:0 0001
04:NONE:00001
04:205 :00 0 0 1
04:205 :010 0 1