Mmc: 812 Select Country - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 812
3 3
DCS
This MMC should be run before any other programming is done to ensure
that the correct software for your country has been selected, or to change
the selection if required.
When using this MMC, the system is restarted to make the selection effective.
Note: You do not need to enable system programming (MMC 800) in order to run this program but you will
still require the technician's passcode.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
ACTION
1. Open programming and select 812
Display shows the country selected by the installer
(e.g. UK).
To accept this setting, go to step 4.
2. Press UP or DOWN key to select a different country
and press RIGHT soft key
3. Press UP or DOWN key to select YES or NO and press
RIGHT soft key
Warning: if you select YES, this will clear the
memory and restart the system
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
SELECT COUNTRY
7 7
CI CII
IMPORTANT
Used to scroll through options
Used to enter selections
Move cursor left and right
NONE
All MMCs
MMC 812 (Page 1 of 1)
3 3 3 3 408i
816
DISPLAY
SELECT COUNTRY
UK
SELECT COUNTRY
DENMARK
DEFAULTING SYSTM
ARE YOU SURE?YES
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408