Mmc: 508 Call Cost - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 508
3 3
DCS
Allows the system administrator to set the Call Cost attributes generated by the system during a
call. This information can be displayed on the keyphone LCD during a call or as an SMDR r e-
cord.
Attributes are as follows:
0 UNIT COST PER MP
1 CALL COST RATE
WARNING
Changing a value when there is a call in progress may result in an inaccurate call cost.
This MPD facility requires the Meter Pulse Detection version of the trunk card. It is not avail-
able on the standard product.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Open programming and select 508
Display shows
2. Dial 0 or 1 (e.g. 1)
OR
Press UP or DOWN key for selection and press RIGHT
soft key to move cursor
3. Enter new value (e.g. 110 for 110 percent)
System returns to step 2
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
CALL COST
3 3
CI CII
When the system is installed to receive MP on a C.O. outgoing call. It
is used for generating total call cost by multiplying it by the number
of pulses. Allows a maximum value of 5000.
This generates additional call cost calculated by multiplying this rate
by the original call cost. Ranges from 100 to 255.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
UNIT COST PER MP
CALL COST RATE
MMC 110 Station On/Off
MMC 414 MPD/PRS Signal
MMC 508 (Page 1 of 1)
3 3 3 3
816 408i
DISPLAY
UNIT COST PER MP
0200PENCE
CALL COST RATE
100%
CALL COST RATE
110%
200 pence
100 percent
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408
_