Samsung DCS Programming Manual page 52

DCS
COMBINED PROGRAMMING MANUAL
ACTION
1. Open programming and select 107
Display shows
OR
For 408 and 408i systems, display shows:
2. Dial station number (e.g., 205)
OR
Use UP or DOWN to scroll through station numbers
and press RIGHT soft key to move the cursor
3. Enter key number (e.g., 18)
OR
Press UP and DOWN to scroll through keys and use
RIGHT soft key to move the cursor
OR
Use above table to select desired extender
System will return to this step
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Note: If the RIGHT soft key will not move the cursor to the right, you are attempting to add an extender to a key
that cannot have one (refer to the table, above, for allowed key extenders).
Default Data:
Related Items:
None
MMC 720 Copy Key Programming
MMC 721 Save Station Key Programming
MMC 722 Station Key Programming
MMC 723 System Key Programming
MMC 107 (Page 2 of 2)
MMC PROGRAMS
NOVEMBER 2001
DISPLAY
[201] EXT (MAST)
01:CALL1
OR
[21] EXT EXTEND
01:DT71
[205] EXT (MAST)
01:CALL1
[205] EXT (MAST)
18:DS _
205] EXT (MAST)
18:DS DS207