Mmc: 421 Msn Digit - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 421
3 3
DCS
Provides a method of assigning an incoming MSN call to a specific station. If any entry in MSN
DIGIT TABLE matches an incoming call's called party number, either the specific station is
alerted, if it is programmed to accept the call, or the call is cleared if it is programmed to reject
the call.
If the incoming called party number does not have a matching entry in the MSN table, the opera-
tor is alerted.
You can give each MSN number to a specific station and you can select a call waiting option:
when a destination is busy, the incoming call must be cleared or camped-on to the station (which
is alerted to the call).
There is a total of eight entries on a trunk basis and each entry consists of the following fields:
DIGITS
DAY DEST
.
NIGHT DEST
CALL WAIT
OPTION
Note: For each BRI access, two adjacent ports are assigned. You need only change the value for one of the
two ports; the value for the other port will be changed automatically.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
MSN DIGIT
3 3 3 3
CI CII
Digits to be received (maximum of 10).
Destination in day mode - can be a station or a station group.
Repeat (B) will be acceptable to the system if received digit is within
numbering plan for a station or station group.
Destination in night mode - can be a station or a station group.
Repeat (B) will be acceptable to the system if received digit is within
numbering plan for a station or station group.
Toggles YES or NO: if YES then the call will be camped-on at busy
destination while NO gives busy indication.
Accept: the selected destination party will be alerted.
Reject: the call is cleared.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
MMC 421 (Page 1 of 2)
3 3 3 3
816 408i
MMC PROGRAMS
NOVEMBER 2001
7 7
408