Mmc: 113 View Memo Number - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 113
3 3
DCS
Allows the system administrator to enter memos on stations. Up to three memos can be entered,
depending on your system. MMC 116 (Alarm and Message) can be programmed to remind the
station user to read the memo(s).
Each memo can be up to 13 characters long and is entered using the dial keypad. For example,
press "6" once to enter the letter "M", and press "3" twice for an "E". Continue selecting charac-
ters from the keypad to complete the memo. Press the programmable "A" key to toggle between
upper and lower case text.
Tip: When the character you want is on the same key as the previous character you typed in, press the UP
key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
PROGRAM KEYS
KEYPAD
SOFT KEYS
SPEAKER
HOLD
"A"
ACTION
1. Open programming and select 113
Display shows
2. Dial the station number (e.g., 205)
OR
Press UP or DOWN to select station and
press RIGHT soft key to move cursor
3. Dial memo number (1–3)
OR
Press UP or DOWN to select and press RIGHT soft
key to move cursor
4. Press RIGHT soft key to move cursor and add
memo via dial keypad using above procedure
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
VIEW MEMO NUMBER
3 3
CI CII
! : ? .
^ ( ) _
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Key #19 (24B keyset) or key #7 (12B keyset) or key #1 (6B keyset)
toggles uppercase and lowercase text.
None
MMC 116 Alarm and Message
MMC 113 (Page 1 of 1)
3 3 3 3
816 408i
, % $
+ { }
DISPLAY
[201] VIEW MEMO
1:
[205] VIEW MEMO
1:
[205] VIEW MEMO
1:_
[205] VIEW MEMO
1:CALL TOM
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408
- < > /
| ; "
=
`