Mmc: 415 Report Trunk Abandon Data - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 415
3 3
DCS
Allows the system administrator or technician to enable or disable the reporting of abandoned
C.O. calls for which CLIP information has been collected on a per-trunk basis.
There are two options for this MMC:
0 REPORT : NO
1 REPORT : YES
Note: In order for these abandoned call records to print on SMDR, use MMC 725 (SMDR Options) and set
Option 11 - Abandon Call - to YES.
ACTION
1. Open programming and select 415
Display shows
2. Dial trunk number (e.g. 705)
OR
Press UP or DOWN to select trunk and use LEFT or
RIGHT soft key to move cursor
3. Dial 1 for YES or 0 for NO (e.g. 0)
OR
Press UP or DOWN to scroll through options and use
LEFT or RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data :
Related Items:
REPORT TRUNK
ABANDON DATA
3 3
CI CII
Abandoned call records for incoming calls with CLIP information will not be
printed on SMDR or stored in the system abandoned call list.
These records will continue to be stored in the station review list.
Abandoned call records for incoming calls with CLIP information will be
printed on SMDR or stored in the system abandoned call list.
These records will also be stored in the station review list.
REPORT: YES
MMC 119 Set CLIP Display
MMC 312 Allow CLIP
MMC 608 Assign CLIP Review Block
MMC 722 Station Key Programming
MMC 723 System Key Programming
MMC 725 SMDR Options
MMC 728 CLIP Translation Table
MMC 415 (Page 1 of 1)
3 3 3 3
816 408i
DISPLAY
[701]
REPORT : YES
[705]
REPORT : YES
[705]
REPORT : NO
MMC PROGRAMS
NOVEMBER 2001
3 3 7 7
408
TRK ABNDN
TRK ABNDN
TRK ABNDN