Mmc: 110 Station On/Off - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 110
3 3
DCS
Allows the system administrator to set any of the followi ng keyset features.
AUTO HOLD
AUTO TIMER
HEADSET USE
HOT KEYPAD
KEY TONE
PAGE REJOIN
RING PREFER
CALL COST
AME BGM
AME PSWD
NOT CONT.CID
Note: Keyset users can set or change these options for their own keyset (refer to the Samsung DCS Keyset
User Guide for details).
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
STATION ON/OFF
3 3 3 3
CI CII
Automatically places an existing C.O. call on hold if a CALL key,
trunk key or trunk route key is pressed during that call.
Automatically starts the stopwatch timer during a C.O. call. (CALL
COST option, below, should be OFF for this feature to work.)
When ON, this feature disables the hookswitch allowing a headset
user to answer all calls by pressing the ANS/RLS key.
When ON, this feature allows the user to dial numbers on the keypad
without having to first lift the handset or press the SPEAKER key.
Allows the user to hear a slight tone when pressing keys on the key-
set.
Allows the user to hear the latter part of page announcements if the
keyset becomes free during a page.
When OFF, requires the user to press the fast flashing button to an-
swer a ringing call after lifting the handset.
If enabled (ON), LCD shows real-time call cost based on Metering
Pulses arrived. (See AUTO TIMER option.)
Determines whether a station using Answering Machine Emulation
will hear their personal greeting or background music (BGM) while
callers are listening to the personal greeting. A BGM source must be
selected for this to work. (Cadence and SVMi-4 voice mail systems
only.)
Sets the Answering Machine Emulation password ON or OFF. (Ca-
dence and SVMi-4 voice mail systems only.)
When ON, the keyset displays the call timer for the duration of an in-
coming trunk call (if AUTO TIMER is ON). When OFF, the CLIP num-
ber for a call is displayed for the duration of the call. (Not applicable
to 408 systems.)
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
MMC 110 (Page 1 of 2)
3 3 3 3
816 408i
MMC PROGRAMS
NOVEMBER 2001
3 3
408