Features Reference Tables; Pri And Bri Lt -T Port; Call Feature Capability; Related Timers - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
is no relationship or restriction between the dial sending mode of the terminal and the ISDN
TRK. (DATA calls must use an ISDN TRK.)
Routing an incoming call to the terminals attached to LT-S port
Incoming calls are routed according to the properties of the selected TRK. Routing is con-
trolled by the MMC tables. You can put a terminal number into the DDI, MSN or TRUNK
RING table as a destination, with or without a wild card digit. You can then answer the in-
coming call from the terminal.

Features Reference Tables

Tables 7 and 8 explain briefly which system features are applicable to ISDN cards.

Related Timers

Feature
ATT Recall Time
C.O. - C.O. Disconnect
Dial Pass Time
DISA Disconnect
DISA Lock Out Timer
DISA Pass Check
First Digit Time
Inter Digit Time
Overlap Inter Digit
Note: These values can be changed in MMC 501 or 503.

PRI and BRI LT -T Port

Call feature capability

Feature
Transfer
Conference
Forward
SMDR
Toll Check
DISA
Implemented
YES
NO
NO
NO
NO
NO
YES
Table 7 – Related DCS timers
Implemented
NO
YES
YES
YES
YES
YES
Table 8 - Call feature abilities of PRI & BRI LT-T
You can check the version of BRI or
PRI
Only for analogue trunk
Only for analogue trunk
Only for analogue trunk
Only for analogue trunk
Only for analogue trunk
Inter Digit time in overlap send-
ing/receiving
Note
Transfer to remote user through ISDN TRK is
not allowed
Conference with remote user through ISDN
TRK
External Forward - forward to remote user
through ISDN TRK
SMDR report of the calls through ISDN TRK
port
Toll check through ISDN TRK port
Use an ISDN TRK as DISA outgoing line
3–14
SPECIAL APPLICATIONS
NOVEMBER 2001
Note