Mmc: 732 Aa Translation Table - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 732
3 3
DCS
This command gives more flexibility to the system by compiling a digit to Plan or Destination
Translation Table, which performs the translation from dialled digit(s) into destination parts. Des-
tination parts can be a station number, station group, REPEAT, Change Greeting Message Code
or AA Plan Table.
If you select REPEAT by pressing the "B" key in the destination field, dialled digits may be by-
passed without translating.
Number of Table Entries
AA Trans Tables 01 and 02 can have up to 100 entries each (but only 50 each on 816 systems).
Tables 03-–12 have up to 25 entries.
If you press the "A" key in the destination field, you can enter AA TRANS NO.
If you press the "B" key you can enter REPEAT.
If you press the "C" key you can enter CHANGE GREETING MESSAGE CODE.
If you press the "D" key, this takes the call to voice mail.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 732
Display shows (note: number of entries for table 01
may show as "001" or "01", etc. depending on system)
2. Dial TABLE number (01–12, e.g. 02)
OR
Press UP or DOWN
Press RIGHT soft key
3. Dial ENTRY number 001–100 (or 01–50)
(see Number of Table Entries, above), e.g 002
OR
Press UP or DOWN
Press RIGHT soft key
4.
Enter Dial DIGIT (e.g. 2
Press RIGHT soft key
AA TRANSLATION TABLE
7 7
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
)
MMC 732 (Page 1 of 2)
3 3 3 3
816 408i
DISPLAY
AA TRANS TB (01)
001:0
AA TRANS TB (02)
001:
AA TRANS TB (02)
002:
AA TRANS TB (02)
002:2
MMC PROGRAMS
NOVEMBER 2001
7 7 7 7
408
500
NONE
NONE
_