DCS
COMBINED PROGRAMMING MANUAL
5.
Enter valid trunk number (e.g., 729)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to return to step 2
6.
Repeat steps 1–5 to remove trunk from group 9 (or
group 0) if necessary
7.
Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
MODE=SEQUENTIAL
All trunks are in group 9 and/or 80 (group 9 only for 408/408i)
LCR programming
Tenant programming (DCS only)
MMC 603 (Page 2 of 2)
MMC PROGRAMS
NOVEMBER 2001
[81] TRK GROUP
MEMBER 01:729