Mmc: 726 Vm/Aa Options - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 726
3 3
DCS
Provides a flexible means of setting in-band signalling for voice mail or auto attendant parame-
ters. There are eight main options for programming and several sub-options to customise the
application. Simple YES/NO, numeric and alpha characters are required for setting VM/AA.
The following options may be selected for VM/AA operation:
0 EXT FOR DN1
1 TRK FOR DN1
2 EXT FOR DN2
3 TRK FOR DN2
4 SEPARATOR
5 DISCONNECT SIGNAL
6 CALL TYPE ID
DIRECT CALL
0
ALL FWD CALL
1
BSY FWD CALL
2
NOA FWD CALL
3
RECALL
4
DIR TRK CALL
5
OVERFLOW
6
DID CALL
7
MESSAGE CALL
8
7 PROGRESS TONE ID
VM/AA OPTIONS
3 3 3 3
CI CII
DTMF information for the station that called the VM/AA
port station which is forwarded to VM/AA port.
DTMF information for the trunk that called the VM/AA
port.
DTMF information for the station that originated the call
to a station which is forwarded to a VM/AA port.
DTMF information for the trunk that called a station for-
warded to a VM/AA port.
In cases where DN2 is used, this specific digit is sent
between the DN1 and the DN2 information. Both DN1
and DN2 must be set to YES for SEPARATOR to be sent.
Thi s signal is sent when the calling station or C.O. line
hangs up.
Under this VM/AA option are several customising appli-
cations:
A call originating directly from another station in the sy s-
tem.
This indicates that a call was forwarded to the VM/AA
port from a station with CALL FORWARD ALL set.
This indicates that a call was forwarded to the VM/AA
port from a station with CALL FORWARD BUSY set.
This indicates that a call was forwarded to the VM/AA
port from a station with CALL FORWARD NO ANSWER
set.
A call is recalling the VM/AA port after being transferred
and not answered.
A C.O. call has gone directly to VM/AA (e.g., trunk 717
DIL to VM/AA).
A call has OVERFLOWED to the VM/AA port from a sta-
tion group.
A DDI call has called the VM/AA port.
A message button or message reply feature code has
been used to call the VM/AA port.
DTMF digits can be sent in place of normal system
tones. Digits can be assigned to the following tones:
MMC 726 (Page 1 of 3)
3 3 3 3
816 408i
MMC PROGRAMS
NOVEMBER 2001
3 3
408