Mmc: 204 Common Bell Control - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 204
3 3
DCS
Determines whether the common bell relay contacts have an interrupted or continuous clo sure
when activated. If interrupted is chosen, the relay follows an internal ring pattern of one second
closed followed by three seconds open.
By default, all common bell relay pairs are assigned as:
DCS: 380x
Compact II: 363–365
816: 362
408 and 408i: 361
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ACTION
1. Open programming and select 204
Display shows current setting
(Note: Display differs according to system)
2. Dial common bell number
OR
Press UP or DOWN key to make selection of
common bell numbers and press RIGHT soft key to
advance cursor
3. Dial 0 for continuous or 1 for interrupted operation
OR
Use UP or DOWN to scroll through options
Press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
COMMON BELL CONTROL
3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor
Used to store data and advance to next MMC
Continuous
MMC 203 Assign UA Device
MMC 219 Common Relay Service Type
MMC 601 Assign Station Group
MMC 204 (Page 1 of 1)
3 3 3 3
816 408i
DISPLAY
[3801]COM. BELL
CONTINUOUS
OR
[363] COM/LD BELL
CONTINUOUS
[3801]COM. BELL
INTERRUPTED
OR
[363] COM/LD BELL
INTERRUPTED
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408