Mmc: 213 Alarm Message - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 213
3 3
DCS
Allows the assignment of a name to an alarm sensor. Names are written using the dial keypad.
Each press of a key selects a character and moves the cursor to the next position. For example,
if the sensor name is "FIRE," press the number "3" three times to get the letter "F." Now press
the number "4" three times to get the letter "I", and so on to complete the name. Press the pro-
grammable "A" key to toggle between upper and lower case text.
Tip: When the character you want is on the same key as the previous character you typed in, press the UP
key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
"A"
ACTION
1. Open programming and select 213
Display shows (e.g. 351 for Compact II)
2. Dial ALARM (e.g., 351 for Compact II or 3502
for DCS)
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
3. Enter name using method described above and
press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
ALARM MESSAGE
7 7
CI CII
! : ? .
^ ( ) _
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Key #19 (24B keyset) or key #7 (12B keyset) or key #1 (6B keyset)
toggles upper case and lower case text.
None
MMC 212 Alarm Ringing Station
MMC 213 [DCS / Co mpact II] (Page 1 of 1)
3 3 7 7
816 408i
, % $
+ { }
DISPLAY
[351] ALARM NAME
[351] ALARM NAME
_
[351] ALARM NAME
FIRE!
MMC PROGRAMS
NOVEMBER 2001
7 7 7 7
408
- < > /
| ; "
=
`