Mmc: 417 Pri Crc4 Option - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 417
3 3
DCS
This option is used to enable/disable CRC4 generation and checking. It is useful with some net-
works which do not support CRC4 framing but only PCM30 framing. By default, the CRC option
is ON.
Note: After changing this option, MMC 418, Card Restart, must be used to restart the card to make the
change effective.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 417
Display shows
2. Enter first trunk number in PRI card (e.g. 701)
OR
Press UP or DOWN key to select first trunk number
and press RIGHT soft key to move cursor
3. Enter 1 for ON or 0 for OFF
OR
Press UP or DOWN key to select and press RIGHT soft
key
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
PRI CRC4 OPTION
3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
CRC4 ON
MMC 418 Card Restart
MMC 417 [DCS/Compact II] (Page 1 of 1)
3 3 7 7
816 408i
DISPLAY
[701] PRI CRC4
ON
[701] PRI CRC4
ON
[701] PRI CRC4
OFF
MMC PROGRAMS
NOVEMBER 2001
7 7 7 7
408