Mmc: 104 Station Name - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 104
3 3
DCS
Allows the system administrator to enter a name, up to 11 characters, to identify an individual sta-
tion.
Names are written using the keypad. Each key press selects a character and moves the cursor to
the next position. For example, if the name is "SAM SMITH", press the number "7" four times to
get the letter "S". Now press the number "2" once to get the letter "A" Continue selecting charac-
ters from the keypad to complete your name. Press the programmable "A" key to toggle between
upper and lower case text.
Tip: When the character you want is on the same key as the previous character you typed in, press the UP
key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
"A"
ACTION
1. Open programming and select 104
Display shows
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station and press
RIGHT soft key to move cursor
3. Enter the station name using the procedure described
above and press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
STATION NAME
3 3
CI CII
! : ? .
^ ( ) _
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Key #19 (24B keyset) or key #7 (12B keyset) or key #1 (6B keyset)
toggles upper and lower case text.
None
None
MMC 104 (Page 1 of 1)
3 3 3 3
816 408i
, % $
+ { }
DISPLAY
[201] STN NAME
[205] STN NAME
_
[205] STN NAME
SAM SMITH_
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408
- < > /
| ; "
=
`