DCS
COMBINED PROGRAMMING MANUAL
4.
Press SPEAKER to advance to MMC entry level
5.
Enter the MMC required and begin programming.
Follow the instructions for that MMC.
Disabling (Closing) Programming Mode
If you wish to immediately close programming mode when you have finished programming:
Return to MMC 800. The display shows that programming is enabled.
§
Use the UP or DOWN key to select DISABLE and press TRSF to exit.
§
If you do not close programming using MMC 800, programming mode will be automatically disabled
if you do not carry out any programming tasks within the time set in the system timer KMMC LOCK
OUT (see MMC 501, System-Wide Timers).
Default Data:
Related Items:
DISABLE (closed)
Passcode=4321
None
MMC 800 (Page 2 of 2)
MMC PROGRAMS
NOVEMBER 2001
801:TEC.PASSCODE
SELECT PROG.ID