Mmc: 423 S/T Mode - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 423
3 3
DCS
Used to select the function of each BRI access. You can set a BRI access as "TRUNK" to which
an ISDN C.O. line is connected, or as "STATION" to which an ISDN terminal is connected.
For each BRI access, two adjacent ports are assigned. You need only change the value for one
of the two ports; the value for the other port will be changed automatically.
Note: Any change made in this MMC will take effect only after restarting the BRI card. Use MMC 418, Card
Restart, to restart the card.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 423
Display shows
2. Dial BRI trunk number (e.g. 703)
OR
Press UP or DOWN key to select the port
Use the RIGHT soft key to position the cursor
under TRUNK (or STATION)
3. Press UP or DOWN key to make selection (TRUNK
or STATION)
Press RIGHT soft key to position the cursor under
the port number again
4. For other ports, repeat steps 2 and 3
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
S/T MODE
3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
TRUNK
MMC 418 Card Restart
MMC 419 BRI Option
MMC 424 S0 Mapping
MMC 423 (Page 1 of 1)
3 3 3 3
816 408i
DISPLAY
[701] S/T MODE
TRUNK
[703] S/T MODE
TRUNK
[703] S/T MODE
STATION
MMC PROGRAMS
NOVEMBER 2001
3 3 7 7
408