Mmc: 404 Trunk Name - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 404
3 3
DCS
Allows a name, up to 11 characters, to be entered to identify an individual trunk.
Names are written using the keypad. Each key press selects a character and moves the cursor to
the next position. For example, if the name is "TELECOMS", press the number "8" once to get
the letter "T". Now press the number "3" twice to get the letter "E." Continue selecting characters
from the keypad to complete the name. Press the programmable "A" key to toggle between up-
per and lower case text.
Tip: When the character you want is on the same key as the previous character you typed in, press the UP
key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
"A"
ACTION
1. Open programming and select 404
Display shows
2. Dial trunk (e.g., 704)
OR
Press UP or DOWN to select trunk and press the
RIGHT soft key to move the cursor
3. Enter trunk name using the procedure described
above
Press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
TRUNK NAME
3 3
CI CII
! : ?
^ ( )
Used to scroll through options/move cursor left or right
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Key #19 (24B keyset) or key #7 (12B keyset) or key #1 (6B keyset)
toggles upper case and lower case text.
No names entered
MMC 104 Station Name
MMC 405 Trunk Number
MMC 404 (Page 1 of 1)
3 3 3 3
816 408i
. , % $
_ + { }
DISPLAY
[701] TRUNK NAME
[704] TRUNK NAME
_
[704] TRUNK NAME
TELECOMS
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408
- < > /
| ; "
=
`