Mmc: 724 Dial Numbering Plan - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 724
3 3
DCS
The system comes with a range of acceptable numbering plans set as default. This MMC allows
the system installer to customise feature codes and dialling plans. An error message is also pro-
vided in case an access/feature code is duplicated.
The following options can be selected. (N/A=not applicable.)
Option
STN DIAL NO.
TRK DIAL NO.
AA/VD DIAL NO.
(816=AA DIAL
NO.)
MISC DIAL NO.
STNG DIAL NO.
TRKG DIAL NO.
FEAT DIAL NO.
S0 STN DIAL NO.
DECT STN DIAL
NO.
If changing feature codes using the FEAT DIAL NO option, you can use the UP and DOWN keys
to scroll through selectable features. Features can also be entered via the dial keypad. For ex-
ample, for OHVA, the number 6 would be pressed three times. If Block Code is required, press 2
twice for BARGE and then use the UP key to select BLOCK. The example shown below de-
scribes the use of this option.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
DIAL NUMBERING PLAN
3 3 3 3
CI CII
Description
Determines the station port dialling numbers
Determines the trunk port dialling numbers
Determines the auto attendant/voice dialler
port dialling numbers
Determines the miscellaneous port dialling
numbers (e.g. MOH)
Determines the station group dialling num-
bers
Determines the trunk group dialling num-
bers
Determines the feature codes
Determines the S0 station dialling number
Determines the DECT station dialling num-
bers
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
MMC 724 (Page 1 of 2)
3 3 3 3
816 408i
DCS/CII
MMC PROGRAMS
NOVEMBER 2001
3 3
408
Dial
816 408/408i
0 0 0
1 1 1
2 2 N/A
3 3 2
4 4 3
5 5 4
6 6 5
7 7 6*
8 N/A N/A
* 408i systems only