Samsung DCS Programming Manual page 222

DCS
COMBINED PROGRAMMING MANUAL
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
"A"
Exa mple 1: Switching options on (yes=print) or off (no=do not print)
ACTION
1. Open programming and select 725
Display shows
2. Dial the option number (e.g. 00)
OR
Use the UP and DOWN keys to scroll through
options and press RIGHT soft key
3. Use the UP and DOWN keys to select YES or NO
and press the RIGHT soft key to save
the data and return to step 2
4. After all desired options have been selected and set,
press TRSF to exit
OR
Press SPEAKER to exit and advance to next MMC
Example 2: Changing no. of lines per page
ACTION
1. Open programming and select 725
Display shows
2. Dial the option number 01
OR
Use the UP and DOWN keys to select and press
RIGHT soft key
3. Enter the number of lines per page in the range 01–99
(e.g., 50)
OR
Use the UP and DOWN keys to change the
number of lines and press the RIGHT soft key to save
the data and return to step 2
! : ? .
^ ( ) _
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Key #19 (24B keyset) or key #7 (12B keyset) or key #1 (6B keyset)
toggles upper and lower case text.
MMC 725 (Page 2 of 3)
, % $ -
+ { } |
DISPLAY
PAGE HEADER
PRINT : YES
PAGE HEADER
PRINT : YES
PAGE HEADER
PRINT : NO
DISPLAY
PAGE HEADER
PRINT : YES
LINE PER PAGE
66 LINE / PAGE
LINE PER PAGE
50 LINE / PAGE
MMC PROGRAMS
NOVEMBER 2001
< > / =
; " `