Mmc: 116 Alarm And Message - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 116
3 3
DCS
Allows the system administrator or technician to set or change the alarm clock/appointment re-
minder feature for individual or all stations. For DCS systems, three alarms (1–3) can be set
for each station. For other systems, two alarms (1–2) can be set. Each alarm may be defined
as a one-time or TODAY alarm, as a DAILY alarm, or NOTSET as described below. The TODAY
alarm is automatically cancelled after it rings, while the DAILY alarm rings every day at the same
time. It is also possible to set a message to display when the alarm is sounded.
Messages are written using the keypad. Each key press selects a character and moves the cur-
sor to the next position. For example, if the message is "MEETING", press the number "6" once
to get the letter "M". Now press the number "3" twice to get the letter "E" Continue selecting
characters from the keypad to complete your message. Press the programmable "A" key to tog-
gle between upper and lower case text.
Tip: When the character you want is on the same key as the previous character you typed in, press the UP
key to move the cursor to the right, then select the character.
The # key can be used for the following special characters (in sequence of key presses):
# space &
[ ] @
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
"A"
ALARM AND MESSAGE
3 3
CI CII
Dial Alarm Type
0 NOTSET
1 TODAY
2 DAILY
! : ?
^ ( )
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Key #19 (24B keysets) or key #7 (12B keysets) or key #1 (6B key-
sets) toggles upper case and lower case text.
MMC 116 (Page 1 of 2)
3 3 3 3
816 408i
. , % $
_ + { }
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408
- < > /
| ; "
=
`