Mmc: 503 Trunk-Wide Timers - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 503
3 3
DCS
Allows certain trunk timer values to be changed on a per-trunk basis or for all trunks. It is not ad-
visable to change these values (with the exception of trunk flash time) without assistance
from Technical Support.
TIMER
ANS.BAK TM
CLEARING
CO SUPV TM
DTMF DURATION
FIRST DGT DELAY
FLASH TIME
NO RING TM
PAUSE TIME
PRS DET TM
RNG DET.TM
WINK TIME
MF/DP INT TM
MFR DLY TM
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
ANS/RLS
ACTION
1. Open programming and select 503
Display shows
2. Dial trunk number (e.g., 704)
OR
Press UP or DOWN key to select trunk and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks and press RIGHT soft
key to move cursor
3. Dial timer number from above list
OR
Press UP or DOWN key to select timer and press RIGHT
soft key to move cursor
4. Enter new timer value (must be four digits, e.g., 0700)
System returns to step 2
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
TRUNK-WIDE TIMERS
3 3
CI CII
RANGE
0100–2500 MSEC
0100–2500 MSEC
0100–2500 MSEC
0100–2500 MSEC
0100–2500 MSEC
0100–2500 MSEC
001–255 SEC
001–255 SEC
0000–2500 MSEC
0100–2500 MSEC
0100–0300 MSEC
0100–9900 MSEC
00–25 SEC
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
See table above
None
MMC 503 (Page 1 of 1)
3 3 3 3
816 408i
DEFAULT
408/408i
0600 MSEC
2000 MSEC
0400 MSEC
0100 MSEC
0600 MSEC
0070 MSEC
004 SEC
003 SEC
0000 MSEC
0300 MSEC
0200 MSEC
0800 MSEC
00 SEC
DISPLAY
[701] ANS.BAK TM
0600 MS
[704] ANS.BAK TM
0600 MS
OR
[ALL] ANS.BAK TM
0600 MS
[704] DTMF DUR.
0600 MS
[704] DTMF DUR.
0600 MS
MMC PROGRAMS
NOVEMBER 2001
3 3 3 3
408
DIAL
Other Systems
00 00
01 01
02 02
03 03
04 04
05 05
06 06
07 07
08 08
09 09
n/a 10
10 11
11 12
_
0700