Mmc: 711 Lcr Time Table - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 711
3 3
DCS
This table gives flexibility to the system, through the LCR ROUTES, to allow calls placed at any
given time of day to use the least cost trunk route that is available. When LCR ROUTE ADVANCE
is allowed, it is possible for calls to be placed on more expensive trunks on any given time of
day. There are four possible time entries per day; the start time of the next time period is the end
time of the previous time period.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
FEATURE KEYS
DAY DIAL
SUN 0
MON 1
TUE 2
WED 3
THU 4
FRI 5
SAT 6
ACTION
1. Open programming and select 711
Display shows
2. Dial day of week (SUN–SAT, e.g., WED)
OR
Press UP or DOWN to make day selection and press
RIGHT soft key
3. Dial time band (A–D, e.g., B)
OR
Press UP or DOWN to make selection and press RIGHT
soft key
4. Dial time via keypad (24-hour clock format, e.g. 0800)
Cursor moves to LCRT
5. Dial entry 1–4
OR
Press UP or DOWN to select entry and press RIGHT
soft key
LCR TIME TABLE
3 3 3 3
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
TIME
BAND
A
B
C
D
MMC 711 (Page 1 of 2)
3 3 3 3
816 408i
DIAL
0
1
2
3
DISPLAY
LCR TIME (SUN:A)
HHMM: 0000 LCRT:1
LCR TIME (WED:A)
HHMM: 0000 LCRT:1
LCR TIME (WED:B)
HHMM: 0000 LCRT:1
LCR TIME (WED:B)
HHMM:0800 LCRT: 1
LCR TIME (WED:B)
HHMM:0800 LCRT: 2
MMC PROGRAMS
NOVEMBER 2001
3 3
408
LCRT DIAL
LCRT 1
LCRT 2
LCRT 3
LCRT 4