Mmc: 420 Pri Option - Samsung DCS Programming Manual

DCS
COMBINED PROGRAMMING MANUAL
MMC: 420
3 3
DCS
Allows the system DDI/NORMAL access and sets dial sending mode (DLSEND) on an individual
port basis to OVERLAP or ENBLOCK. However, if you change the dial sending mode of one port,
all other ports must be set to the same dial sending mode. If your PRI line is not registered for
DDI service at the Central Office, you can use NORMAL service (e.g. subaddress or normal trunk
incoming service). If you set PRI MODE to DDI, you can service DDI (Direct Dial Inward) to a spe-
cific station or station group according to DDI NUMBER TABLE.
There is also a CHANNEL ANY option. If set to YES, when a call is initiated the channel used is
specified by the network; if set to NO, when a call is initiated the DCS/Compact II will specify
which channel to use.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ACTION
1. Open programming and select 420
Display shows
2. Dial PRI trunk number (e.g. 704)
OR
Press UP or DOWN key to select the port
Press the RIGHT soft key to move the cursor
3. Press UP or DOWN key to make selection (CHANNEL
ANY, PRI MODE or DLSEND) and press RIGHT soft
key to move the cursor
4. Use UP or DOWN key to make selection
and press RIGHT soft key to return to step 2
5. Press TRSF to store and exit
OR
Press SPEAKER to store and advance to next MMC
Default Data:
Related Items:
PRI OPTION
7 7
CI CII
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
CHANNEL ANY:
PRI MODE:
DLSEND:
MMC 418 Card Restart
MMC 406 Trunk Ring Assignment
MMC 714 DDI Number and Name Translation
MMC 420 [DCS / Compact II] (Page 1 of 1)
3 3 7 7
816 408i
DISPLAY
[701] PRI OPTION
CHANNEL ANY:YES
[704] PRI OPTION
CHANNEL ANY:YES
[704] PRI OPTION
DLSEND : OVERLAP
[704] PRI OPTION
DLSEND : ENBLOCK
YES
DDI
OVERLAP
MMC PROGRAMS
NOVEMBER 2001
7 7 7 7
408