Adding Names To The Translation Table - Samsung DCS-816 System Administration And Special Features Manual

SAMSUNG
DCS-816
4. Press TRSF to store and exit programming
OR press SPEAKER to store and advance to the next
program

3.17 ADDING NAMES TO THE TRANSLATION TABLE

This program allows the system administrator to associate a CLIP number received from
the central office with a name programmed in this translation table.
The translation table consists of 200 entries, each comprising a 16-digit telephone number
and a 16-digit name.
The procedure for entering names is as described in "Procedure for Entering Names" un-
der section 3.4 Program Station Names.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
Open customer programming and follow the instructions below.
ACTION
1.
Select 728
2. Dial an entry number (e.g., 005)
OR use UP or DOWN to scroll through entries and
press the right soft key to select entry
3. Enter the telephone number and press right soft key
to advance to name entry
OR enter the telephone number and press the left soft
key to return to step 2
4. Enter associated name and press right or left soft key
to return to step 2
OR press SPEAKER to save and advance to the next
program
OR press TRSF to save and exit programming
Used to scroll through options.
Used to enter selections.
Move cursor left and right.
Used to store data and advance to next program.
Used to clear previous entry.
3 - 16
System Administration and Special Features Guide
DISPLAY
CLIP XLAT (001)
DIGIT :
CLIP XLAT (005)
DIGIT : _
CLIP XLAT (005)
DIGIT : 3054264100
CLIP XLAT (005)
SAMSUNG TELECOM
March 1999
[MMC 728]